Wired Playfield Shipping Crate

 

I used two 1/2 inch thick, 4 by 8 feet OSB sheets and 7/8 inch screws to put it together. I enough scrap left over.

Be sure to zip tie any loose parts and wiring harness.

Material Cost: Under $25.00

Tools Used: Small table saw, handheld circular saw, cordless drill, tape measure

 

pfshipping1.jpg (197184 bytes) pfshipping2.jpg (371035 bytes) pfshipping3.jpg (262091 bytes) pfshipping4.jpg (397845 bytes)

 

 

HOME  | CONTACT

© Copyright 2003-2005 Jesse Kujawa. All rights reserved. Unauthorized use of images or content is strictly prohibited and protected under Federal law.